Exitile Ltd

Standard Ceiling | EG

Product Code: EX/EG

Specification

Construction: Recessed frame with To Take Fibre Tile door
Orientation: Ceiling
Fire Rating: Not Rated
Acoustic Rating: Not Rated

Data Sheet

Intro

The Exitile Type EX/EG ceiling access panel is designed to fit into a “Lay-in” / Exposed Grid type suspended ceiling system. Various types are available, depending upon the type of grid and tile used:- 24 FLAT For use within 24mm wide Table Tee System using square edged ceiling tiles 24 TEG For use within 24mm wide Table Tee System using tegular ceiling tiles. 15 TEG For use within 15mm wide Table Tee System using tegular ceiling tiles.

Description

The recessed door tray is fitted with a sliding pin hinge and has a removable loose edge to enable a trimmed ceiling tile to be inserted into the door tray. The access panel is secured using a standard budget lock.

Construction

Constructed from 1.2mm and 1mm thick Zintec Steel, with a polyester powder coating of matt white Ral 9010, 20% Gloss (other colours available upon request). The recessed door tray is fitted with a sliding pin hinge and has a removable loose edge to enable a trimmed ceiling tile to be inserted into the door tray. The access panel is secured using a standard budget lock. Alternative lock types can be provided upon request.

Dimensions

Standard sizes are shown below. Non-standard sizes can be manufactured to order upon request, please contact our Technical Sales Department. When ordering, please state the size and type of ceiling tile to be used within the ceiling system. 600 x 600mm (to suit 600 x 600 ceiling tile), 1200 x 600mm (to suit 600 x 600 ceiling tile), 1200 x 600mm (to suit 1200 x 600 ceiling tile), 1200 x 1200mm (Double door to suit 600 x 600 ceiling tile), 1200 x 1200mm (Double door to suit 1200 x 600 ceiling tile)

Fitting

These panels are designed to rest inside the Tee sections of the ceiling grid. This will automatically give the correct fixing position. The frame will require independent bracing and must not be solely supported by the Tee sections. These access panels can be fitted with a Controlled Action Device (CAD) upon request. This allows the panel door to open approx. 150mm before being arrested. By pulling the door tray towards you the door can then be fully opened. For panels greater than 1200 x 600mm it is advisable to request the fitting of safety chains.